IEC 60695-11-10：Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical flame test methods
Abstract摘要
Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-me-tallic materials, exposed to a small-flame ignition source of 50 W nominal power. These test methods determine the linear burning rate and the after flame/afterglow times, as well as the damaged length of specimens. Applicable to solid and cellular materials that have an apparent density of not less than 250 kg/m3, determined in accordance with ISO 845. They do not apply to materials that shrink away from applied flame without igniting; ISO 9773 should be used for thin flexible materials. The test methods described provide classification systems which may be used for quality assurance, or the pre-selection of component materials of products. May be used for the pre-selection of a material, providing positive results are obtained at a thickness equal to the smallest thickness used in the application.
